Bayliner 300 CRUISER, Дополнение к руководству пользователя

Страница: 66 / 96

60
300 Cruiser • Owner’s Manual Supplement
Chapter 7: Deck Equipment
Cleats & Bow/Stern Eyes
Read the section on towing in the Cruiser & Yacht Owner’s Manual before:
•
Towing anything behind your boat.
•
Being towed by another vessel.
Windlass (If Equipped)
•
Read and follow the manufacturer’s instruction manual before using the anchor windlass for the first time.
•
The windlass can be controlled from a switch at the helm or from the deck foot switches.
•
Make sure that the windlass circuit breaker is turned On before using the anchor windlass.
•
To raise the anchor, use engine power (not the windlass) to move your boat to, and directly above, the anchor.
•
Dislodge the anchor from the bottom by pulling it straight up with the windlass.
•
Before getting underway, make sure the anchor is secured and the windlass circuit breaker is turned Off.
PERSONAL INJURY and/or PRODUCT or PROPERTY DAMAGE HAZARD!
NEVER lift your boat using the bow/stern eyes or the cleats.
WARN I NG! !
DA NGER
PERSONAL SAFETY & PRODUCT DAMAGE HAZARD!
An unsecured anchor could accidentally release while your boat is moving, damaging your
boat and causing serious injury or death.
After retrieving the anchor:
•
Secure the anchor with an anchor safety strap, or a chain stopper.
•
Switch OFF the windlass circuit breaker to prevent accidental operation.
DANGER !
!
PRODUCT DAMAGE HAZARD!
Do NOT rely on the windlass alone to hold your boat at anchor. After setting the anchor, tie the
rode off to a cleat or equivalent strong point.
Do NOT pull your boat to the anchor using the windlass, or continue running the windlass if it
has stalled or is overloaded.
CAUTI ON !