14
NEVER USE THE WINDLASS TO PULL THE BOAT TO THE ANCHOR
When the bow is directly over the anchor, the windlass operator can retrieve the anchor while
being careful that the rode is feeding properly over the bow roller, through the windlass
gypsy, and through the deck sleeve. Be careful to prevent the anchor from swinging against
the hull. Clean all bottom debris from the anchor before retrieving completely. Snub off the
anchor to avoid excessive movement while cruising and turn off the windlass power switch
when the procedure is complete.
NOTE:
BE SURE TO CHECK CHARTS, DEPTH SOUNDER, AND TIDE TABLE FOR
ADEQUATE WATER AT ANCHORAGE DURING LOW TIDE
CAUTION:
The windlass operator is responsible for turning on windlass prior to anchoring
or weighing and turning off after. Incidental activation of windlass can result in serious
injury.