2
3
1G
1G
Meter Display:
The picture below shows all the symbols that appear
on your meter display. To view, with the meter off, press
and hold
▲
or
▼
. All display segments will appear for
10 seconds. If you need more than 10 seconds to
check the display, press and hold
▲
or
▼
again.
While all characters are displayed, it is very
important to make sure that
is fully displayed.
If there are missing segments, see page 42.
This may affect the way you see your results.
Center area
on the display that
shows either your
test result or any
error codes.
Bottom
area on the display
showing the date
and time.
Sound is
turned on.
The meter is ready
to start a test.
Control
result marker.
Before
Meal result
marker.
After Meal
result marker.
Shows a
Logbook entry.
The battery
is low and
needs to be
changed.
A
reminder has
been set.
or
will
appear if the
meter is in 12
hour setup.
Results are
shown as
mg/dL or mmol/L.
The 7 appears
when viewing 7
day HI–LO
summary.
Shows it is
too cold or
too hot for
your meter to
test accurately.
Average.
Date
format.
Cocking Handle
Release Button
Lancet Holder
Lancet
Endcap
Dial
Round
Protective
Cap
Gray Adjustable Endcap
MICROLET
®
2 Lancing Device:
Grip Indent
Sample Tip
Blood sample
pulled in here.
Gray End
Insert this end into
the test strip port.
USB Mini
Cable
Port
Up/Down
Scroll
Buttons
Test Strip
Port
Memory
Button
(On/Off,
Memory Recall,
Enter)
Nintendo DS™ Connector
CONTOUR
®
Test Strip:
Bayer’s
DIDGET™ Meter:
LED
Display
Intr
oduction
Meter Display
Intr
oduction
Testing T
ools
Remove
meter from
Nintendo DS
or disconnect
from PC.