8
Need Help? Call toll free: 1-800-348-8100
Getting
Started
9
www.bayerdiabetes.com/us
Getting
Started
Initial Startup:
First charge your meter. Your computer can be used
to perform initial startup while your meter is charging.
You can also initiate setup directly on your meter
once it is fully charged. When you fi rst turn on your
CONTOUR
®
USB meter, a setup sequence begins.
•
Press and hold the Menu button until the
meter turns on.
After a welcome screen, you
will see the Select Language screen.
•
Press the
▲
or
▼
button to select your desired
language. When highlighted, press the
OK
button.
A screen confi rms
your language.
On the next screen choose:
Quickstart
(see page 9),
Customize
(see page 10),
or
?
Help
.
Quickstart
– is set to the default settings. You will
need to confi rm the date and time, then you can
immediately begin testing. You can also change
these settings later.
Customize
– allows you to adjust settings.
By default:
AutoLog is on;
Target is set to: Before Meal, 70–130 mg/dL
After Meal, 70–180 mg/dL
These settings can be changed in Setup.
?
Help
– provides additional information.
Initial Startup Using Quickstart:
•
Press the
Quickstart
button.
A screen confi rms
your choice.
•
The next screen has the current date and time.
If it is correct press the
Accept
button. If incorrect,
press the
Change
button (see pages 43–45).
Setup is complete. You may now check your
blood sugar.
Initial Startup
Initial Startup Using Quic
kstart
