Multifunction Baby Bottle Warmer
EN
8
Operation
!
Attention:
Never use the bottle warmer without water in the heating tank!
■
Stand the bottle warmer on a horizontal and stable surface .
■
The steam that is released during the warming up process is hot . Keep your hands away during the
warming up process .
Warming up feeding bottles
■
Pour 90 ml of water into the heating tank A
3
.
■
Place the baby bottle into the heating tank A
3
.
■
Never allow water to rise above the neck of the bottle or to spill over the edge of the bottle warmer .
■
Check that the control dial A
6
is in the "OFF" position (turned off) and plug the bottle warmer into
a power socket .
■
Select a heating method by turning the control dial A
6
to the right to the "baby bottle 40 °C"
symbol . This is the expected water temperature around the bottle . This is not the food temperature .
■
The indicator light A
5
signalises that the bottle warmer is running .
■
During the warming up process, the light will turn on and then turn off once the water around the
bottle is heated to the maximum temperature .
■
After reaching 40 °C, the water temperature is maintained at the same level until the appliance is
turned off by turning control dial A
6
to the left towards the "OFF" symbol (turned off) .
■
Always test the food once it reaches the desired temperature, immediately remove it from the bottle
warmer .
■
Shake the baby food or milk after taking it out of the bottle warmer . Check the temperature of the
food or milk by dripping a little on to your wrist .
Heating up baby food
■
Pour 150 ml of water into the heating tank A
3
.
■
Place the bowl A
2
with 90–150 ml of food into the heating tank A
3
.
