Bay-Tek Willy Crash Mini, Руководство по обслуживанию

Страница: 31 / 41

31
HOW TO REMOVE MONITOR
Remove Monitor from Housing:
Remove the 18 screws using a # 2 square bit from the
perimeter of the wood housing. Save for later installation.
Remove the 4 Phillips bolts, washers, and spacers in the center
that are supporting the monitor.
Save for later installation.
Remove the top wood from the monitor housing.
The monitor can now be removed from housing and the new
monitor set in place.
Helpful hints when re-assembling the cabinet:
1.) Feed the 4 pin connector and the new monitor power cable
through the hole before seating the wood housing back in
place,
2.) Ensure the 4 Phillips bolts, washers, and spacers
are in place when securing the wood housing to the
new monitor .
3.) Re-install the 18 screws around the perimeter of
the housing.
4.) Using 2 people, feed the monitor power cord into the hole in
the cabinet as you install the monitor housing to the cabinet.
Place the white plastic locking tabs fully into the guides and
push the monitor down to lock in place.
Re-install the wood lock to further secure the monitor.
5.) Plug the HDMI cable into the bottom of the new monitor.
Install a new plastic zip tie to secure the HDMI cable in place.
6.) Feed the new monitor’s power cable through the wire sad-
dles and plug back into AC power.
7.) Re-install marquee by feeding light power cable through the
hole in the top of the cabinet as the marquee is placed on top
of the game.
8.) Re-install the 3 bolts using a 7/16” wrench.