Bay-Tek PRIZE HUB Modular, Руководство по обслуживанию

Страница: 56 / 90

56
Monitor shows “Sleep
Mode” on screen.
Re-Boot game to see if
problem still exists.
Power game down, wait
10 seconds, then power
game ON to reset.
Power Supply or Motherboard not
communicating correctly with
monitor.
Check power supply voltage.
Replace power supply. (AAPS1011)
Ensure both power supply connections are
secure to motherboard.
Refer to Monitor/Motherboard Power Supply
Diagnostics
Replace motherboard. (AAMB7-HD)
MAIN UNIT TROUBLE SHOOTING GUIDE
Monitor shows “No
Signal” then black.
Re-Boot game to see if prob-
lem still exists.
Power game down, wait 10
seconds, then power game
ON to reset.
Motherboard/power
supply is not working.
Faulty or loose RAM
Large power connector unplugged
on motherboard
Small 12 Volt power connector
unplugged on motherboard.
Monitor VGA cable unplugged.
Faulty power supply - Check for 12
Volts and green LED on
motherboard.
Refer to Monitor/Motherboard Power Supply
Diagnostics for further diagnostic information
If all else fails - Replace faulty motherboard.
(AAMB7-HD)
AAMB7-HD
Problem Probable Cause Remedy
Monitor touchscreen
is not touching where
it should
Recalibrate the touchscreen.
Refer to “How to Calibrate Touchscreen”
Monitor shows “No
Boot Device” on
screen.
Re-Boot game to see if
problem still exists.
Power game down, wait
10 seconds, then power
game ON to reset.
Hard Drive is not
working.
No 12 Volts to hard drive
Faulty Hard Drive or faulty
motherboard.
No SATA drive in motherboard. Check for red
& black power connector from power supply.
Refer to “How to Update Software”
Replace hard drive (A5HD1800) or
motherboard as needed.
AAMB7-HD
Monitor shows “Client
Mac Address” on
screen.
Re-Boot game to see if
problem still exists.
Power game down, wait
10 seconds, then power
game ON to reset.
Hard Drive is not
working.
No 12 Volts to hard drive
Faulty Connection or cable plugged
into wrong place
No SATA drive in motherboard. Check for red
& black power connector from power supply.
Refer to “How to Update Software”
Replace hard drive (A5HD1800) or
motherboard (AAMB7-HD) as needed.