9
1. Place the rear cabinet near or at its
final location.
2. Open the rear cabinet door, uncoil
the power cord and feed the cord
through the hole. Uncoil other
wiring cables.
Do not plug the
power cord into the wall outlet at
this time
. See figure 1.
3. Move middle cabinet in front of
Rear cabinet. Plug in all cables
between middle and front,
matching connectors.
See figure 2.
Assembly Instructions
4. Attach the ticket plate box to the
middle cabinet using black wood
screws (D). Plug in light cable.
See figure 3.
5
. Install the metal screens.
a. Install the middle screen by
placing it over the two
threaded studs on the ball
grate. Secure with two nylon
locknuts (F). You will need a
3/8” socket. See figure 5.
b. Attach the front of the screen
to the ramp with two black
wood screws (D).
a. Peel the paper coating off of
the frosted acrylic piece and
attach to the back of the
ticket plate box with black
wood screws (D).
