Bay Tek Games Big Bass Wheel Pro, Руководство по устранению неисправностей, Страница: 12 / 18

Adjusting Wheel Sensor
The arrow pointer will show the customer which ticket value they have won.
Remember: There is a ½ inch buffer zone between panels that provide a small margin of error.
This space is also present on the big bonus values.
It allows a big bonus value to score even though the pointer may be slightly above or below the
actual sticker on the wheel.
Check the wheel position
1.) Open front doors and unlatch clasps holding
front plexiglass in place. There are 2 located behind
the speakers.
2.) Front plexiglass will now slide up like a roll-top desk.
3.) Push menu button to enter menu.
4.) Check if value on monitor matches wheel position pointer.
5.) Watch bottom left of display as you manually turn the wheel down.
The wheel may have to go a full revolution so the game can
find home position.
Spin the wheel downward by hand, watch the display change
as the wheel moves to the next score panel.
5.) Slowly rotate the wheel downward as it approaches a bonus section.
Watch the display as it turns to a 4, then slowly move wheel down.
Stop the wheel as soon as the display changes to the bonus.
6.) Look at pointer and verify that it is on the boundary between the
4 space and bonus value.
If the pointer is more than ¼ inch off:
1.) Open left side door of game.
2.) Locate 2 phillips screws on bracket.
3.) There are slots on this bracket to allow adjustment.
4.) Loosen 2 screws and slightly move bracket.
5.) Tighten screws and re-check wheel position.
IMPORTANT: ONLY SPIN WHEEL DOWNWARD