Bay Plastics Vitoria 5000, Руководство по сборке

Страница: 2 / 22

Assembly Instructions
For additional information please visit our website:
www.bayplastics.co.uk
Feria 3x3 Patio Cover
Care and Safety Advice
 Please follow the instructions as listed in this manual.
 Sort the parts and check the list of contents.
 For safety purposes we strongly recommend that the product will be assembled by at least two
people.
 Some parts have metal edges. Please be careful when handling components. Always wear gloves,
shoes and safety goggles during assembly.
 Do not attempt to assemble the product in windy or wet conditions.
 Dispose of all plastic bags safely – keep them out of reach of small children.
 Keep children away from the assembly area.
 Do not attempt to assemble the product if you are tired, have taken drugs, medications or alcohol, or
if you are prone to dizzy spells.
 When using a stepladder or power tools, ensure that you follow the manufacturer’s safety advice.
 Do not climb or stand on the roof.
 Heavy articles should not be leaned against the poles.
 Do not hang or lay on the profiles.
 Please consult your local authorities if any permits are required to construct the product.
 Keep roof and gutter clean of snow, dirt and leaves.
 Heavy amounts of snow on roof can damage the product making it unsafe to stand below or nearby.
 This product was designed and produced to be a patio cover only.
Some versions of this product are painted. If colour was scratched during assembly it can be fixed with the
following tints: White – RAL 9016
Grey – RAL 7012.
IMPORTANT:
Please read these instructions carefully before you start to assemble this patio cover. Please carry out the
steps in the order set out in these instructions. Keep these instructions in a safe place for future reference.
Cleaning Instructions
When your product needs cleaning use a mild detergent solution and rinse with
cold clean water. Do not use acetone, abrasive cleaners, or other special
detergents to clean the panel.
Before Starting Assembly
 This product must be assembled on a solid base (such as concrete or
asphalt).
 Choose your site carefully before beginning assembly. Site surface
(mainly below poles) needs to be level.
 During assembly use a soft platform below the parts to avoid
scratches and damages.
During Assembly
When encountering the information icon, please refer to the relevant
assembly step for additional comments and assistance.
The Vitoria carport has 4 gutter heads, you can choose whether to make them
active or keep them in its original condition – non active. To activate please
follow step 15.