Bay Networks BayStack350T, Руководство пользователя, Страница: 48 / 140

Using the BayStack Model 350T 10/100 Autosense Switch
1-14
893-00992-A
Managing with SNMP Management Applications
If you are using an SNMP management application to manage the BayStack 350T
switch, you must first assign an IP address to the switch so that the SNMP
management software can communicate with the switch.
To enter the BayStack 350T switch IP address, follow these steps:
1.
Connect a console terminal directly to the BayStack 350T switch service
port or through a modem.
The console terminal can be a VT100 terminal or a PC running VT100
terminal-emulation software (see
“Service Port Cabling ” in Chapter 3, “Using
the Console Interface ”).
2.
Configure the console terminal for 9600 baud, 8 data bits, no parity, and
1 stop bit.
Be sure to place the console terminal online; do not leave it in setup mode.
3.
Press [Ctrl]+C on the console terminal keyboard.
4.
The console interface (CI) Main Menu appears on the screen (see “Using
the CI Menus ” in Chapter 3, “Using the Console Interface ”).
5.
Select the IP Configuration option from the Main Menu.
The IP Configuration screen is displayed.
6.
In the IP Configuration screen, fill in the following fields:
— In-Band IP Address
— In-Band Subnet Mask (if required)
— Default Gateway (if required)
7.
Set SNMP traps, if needed.
To set SNMP traps, refer to “SNMP Configuration” in Chapter 3, “Using the
Console Interface .”
8.
Press [Ctrl]+C to return to the Main Menu.
BOOK.MKR Page 14 Tuesday, March 4, 1997 7:24 PM