E
STEP 3
STEP 4
STEP 5
Please do not tighten the hardware until the entire assembly is completed.
E
7
E
7
STEP 3.1
STEP 3.2
STEP 3.3
8
9
8
4
3
2
1
1
Secure 2 Support Leg (9) to the Slat Support (8) as shown on step 3.1. Insert the pre-set
metal on Slat Support (8) to the metal bracket on each side of Side Panel (2) & (3).
Then securing the metal bracket as shown in step 3.3 with 1 Screw (E) each side using
Phillips Head Screwdriver (NOT INCLUDED)
Tighten All Bolts from step 1 to step 3 by using L-key (F) & (G) that has been provided.
Attached slat (7) to Front Side Rail (4) & Back Side Rail (5) by unrolling and securing
with 6 Screw (E) per set. Securing Slat (7) to Back Side Rail (5) with 2 Screw (E) per
each side as step 4.1. Following by step 4.2, using 1 Screw (E) to secure Slat (7) to Front
Side Rail (4). Repeat the same step to attach another set of slat (7).
ASSEMBLY
COMPLETE
STEP 4.1
STEP 4.2
