3
5
4
6
5
10
18
17
19
11
11
12
12
13
4
4
13
DR
I
DL
I
C
C
A
B
B
A
D
C
C
H
D
x3
x3
x3
H
Attach pieces 10, 11 & 12 using screws (C). Make sure that the built-in
ridge is facing inwards and at the bottom.
Turn the drawer upside down. Line up the holes on the outside pieces with
the holes on the runners (IDR & IDL), secure to the drawer using screws (D).
Slot piece 13 into the ridges. First insert the cam locks (B) into the
pre-drilled holes on parts 11 & 12. Then insert cam dowels(A) into each
side, you then need to line up these screws with the pre-drilled holes on
the front piece (17 18 19). Once attached, tighten the cam locks (B)
using a cross-head screwdriver and ensure the piece is secure.
Attach piece 4 to piece 5 using wooden dowels (H), screws (C).
