STEP 5
STEP 6
Please do not tighten the hardware until the entire assembly is completed.
Tighten All Bolts from step 1 to step 4 by using L-key (G) & (H) that has been provided.
Attached Slat (7) to Front Side Rail (4) & Back Side Rail (5) by unrolling and securing
with 6 Screw (H), per set using Phillips Head Screwdriver. Securing Slat (7) to Back Side
Rail (5) with 2 Screw (F) as step 5.1. Following by step 5.2, using 1 Screw (F) to secure
Slat (7) to Front Side Rail (4). Repeat the same step to attach another set of Slat (7).
STEP 5.1
ASSEMBLY
COMPLETE
3
2
4
1
7
F
STEP 5.2
7
F
