baxter Colleague 3 CXE, Руководство оператора

Страница: 66 / 230

4
Battery Charge Progress Indicator Alert
4-12
COLLEAGUE CXE VOLUMETRIC INFUSION PUMP OPERATOR’S MANUAL 071960491
When the battery is fully depleted, the
NO BATTERY - Plug In Now
alarm occurs. An audible tone sounds and a Plug In Now pop-up
window displays (Figure 4-16), alerting the user that infusions have
stopped and the pump will shut down in less than 5 minutes. The pop-up
will reappear every minute until the pump shuts down.
Pressing the
Ok
soft key will clear the pop-up but will not silence the
audible tone. Pressing the
Alarm Silence
key will silence the tone for
two minutes. The status line will continue to show the message
NO
Battery - Plug In Now
until the pump shuts down.
When the
NO BATTERY - Plug in Now
alarm occurs plug the pump in
immediately. Do not use the pump on battery power until the batteries
have been fully recharged. Charge the battery for at least
12 uninterrupted hours or until the battery operating time displayed
under the battery charge icon in the upper left part of the screen is 3h
15m (for triple channel pumps) or 4h 00m (for single channel pumps). A
complete charge may take longer than 12 hours.
Battery Charge Progress Indicator Alert
When the pump is plugged into AC power after operating on battery
power, a Charge Progress Indicator alert occurs. The purpose of this
alert is to notify the user that the battery is charging, and to give an
approximation of charge progress.
In the status line area at the top of the display (Figure 4-17), the charging
progress is shown using a scale of 1-20, with 20 equalling a full battery
charge.
Note: There is no audible tone associated the the Charge Progress
Indicator alert.
Note: Recharge time may vary depending on battery life.
Figure 4-16 NO BATTERY Alarm
Pop-up
Figure 4-17 Charge Progress
Indicator