baxter Colleague 3 CXE, Руководство оператора

Страница: 214 / 230

11
Unloading the Administration Set
11-18
COLLEAGUE CXE VOLUMETRIC INFUSION PUMP OPERATOR’S MANUAL 071960491
1.
Close the regulating clamp on the
administration set.
2.
Locate the appropriate Manual Tube
Release on the right side of the pump
channel.
3.
Push and grasp the release tab (Figure
11-17A), turning it out (Figure 11-17B).
4.
Rotate the tab counterclockwise until it
stops (Figure 11-17C).
Note: If the pump is off when the MTR is acti-
vated, it will automatically turn itself on.
The
Reset Manual Tube Release
alarm occurs and the Reset Manual
Tube Release screen displays
5.
This closes the keyed slide clamp and opens
the pump mechanism so the administration
set can be removed.
6.
Remove the administration set from the pump.
If the pump is on with no administration set in the tubing channel, a
Reset Manual Tube Release
alarm occurs.
If the pump is on and the administration set is in the tubing channel
when the MTR is activated, a
Close Regulating Clamp
alarm
occurs. Close the regulating clamp on the administration set ,
remove the administration set, and then reset the mechanism.
Resetting the Manual Tube Release
If a channel failure occurs and an attempt is made to power off the pump
without first resetting the MTR, the Reset Manual Tube Release pop-up
is displayed (Figure 11-18).
A
B
C
Figure 11-17 Using
the MTR
Figure 11-18 Reset MTR Pop-up