Baxi VALOR FIRES 845, Инструкция для установщика и владельца

Страница: 10 / 28

Q Do you want to fit the firefront against a flat wall with the base of the
firefront on a hearth or similar surface?
A You will need to purchase two optional spacer frame kits - See section 3 . These
spacers when added to the one supplied with the firefront enable the firefront to
be flat wall fixed.
The depth of the combined spacer frames is 150mm.
General notes to read before fitting your firefront.
Ensure that the boiler has been commisioned and the benchmark checklist in
the boiler installation guide completed.
There should be at least 10mm clearance between the top of the fascia and anything
such as a shelf, fireplace surround or mantel etc. This will allow the fascia to be
removed and fitted during servicing. To check the shelf clearance gently place the
fascia against the surface to which it is to be fixed and measure the distance from the
top of the fascia.
If fitting the firefront onto a reflective or shiny surface such as a hearth we
recommend that this surface does not extend further than 300mm from the fixing
plane (wall). Reflective or shiny surfaces that project further than 300mm may reflect
an image of the internal light source.
INSTALLER GUIDE
Page 10
©
Baxi Heating U.K. Limited 2009.