Baxi LUNA HT 1.330, Настройка

Страница: 1 / 11

Setting Parameters:
The editable parameters are those between 504 and 652. Proceed as follows to access
these parameters:
1. Simultaneously press keys 1 and 4 on the QAA73 controller for
approximately 3 seconds. The message “Initializing BMU parameters”
appears on the display.
2. Simultaneously press keys 1 and 2 for approximately 3 seconds. Parameter
504 will appear on the display.
3. Press key 1 or 2 to scroll through the list of parameters.
4. To change the value of a selected parameter, press key 3 or 4 to decrease or
increase the value respectively.
5. Press key 5 to enter the new values and exit programming of the boiler.
B
AXI
L
UNA
HT 1.650 S
ETUP
N
ATURAL
G
AS
Luna HT 1.650 Setup Natural Gas