Baxi Bermuda Inset 3 Super, Руководство по эксплуатации

Страница: 8 / 12

6.0 Spares and Cleaning
8
6.1 Cleaning the Fire
1. The fire may be cleaned with a damp cloth and
wiped with a soft duster. Do not use metal polish
on any parts of the appliance. (BC model only -
The fender assembly may be cleaned with a non-
abrasive aluminium, brass or chrome liquid
cleaner.)
2. It is possible that some soot may be
deposited on the coals after use. This is
acceptable providing it is not allowed to
accumulate. Should any soot accumulation
become excessive the fuel effect pieces should be
removed from the fire for cleaning. it is
recommended that gloves are worn when handling
these items. Cleaning should be carried out in a
well-ventilated area or the open air by gently
brushing with a soft brush with the pieces/bed held
away from the face to avoid inhaling the dust. The
use of a normal domestic vacuum cleaner is not
recommended as it may blow dust back into the
air. Care must also be taken if retouching the fuel
effect pieces is required. Always wash hands
thoroughly after handling the fuel effect pieces.
6.2 Changing the Bulbs
IMPORTANT : Only replace the bulb/s with a 12V
20W halogen capsule bulb available at most DIY
outlets, specialist electrical stores or from
Baxi UK Limited.
1. Remove the coals, placing them on a
newspaper or similar to prevent soiling
furnishings.
2. Lift out the glass retaining assembly (Fig. 9).
3. Remove the bulb by pulling out from the
ceramic bulb holder to disengage the pins
(Fig. 10).
4. Fit the replacement bulb in reverse order.
NOTE: Halogen bulbs should not be handled with
bare fingers. Always use a cloth to grip the bulb.
5. Replace the glass retaining assembly and
reassemble the coal bed (see Arranging the Coals
- section 5.0).
6.3 Cleaning or Changing the Glass
1. Remove the coals, placing them on a
newspaper or similar to prevent soiling
furnishings.
2. Lift out the glass retaining assembly (Fig. 9).
3. Carefully remove the three amber glass pieces
and clean (Fig. 11).
4. Fit the new or cleaned glass and reassemble
the coals.
Fig. 9
Fig. 10
Fig. 11
Glass Retaining Assembly
Halogen Bulbs
Amber Glass Pieces