1.
Gently pinch the sides of the cable guide (See figure 1 - Item 4) and push the cable
guide into the required rectangular slot.
2.
Place the electrical cable into the guide and close the top of the cable guide.
If the electric cable is damaged, to avoid a hazard it must be replaced by a Baxi Fires
Division authorised service agent, or similarly qualified person (See the last page of this
guide for useful telephone numbers).
All external wiring between the heater and the electrical supply shall comply with
current IEE regulations.
Heater fixing.
All fixings supplied with the heater have been identified in figure 2.
The heater must be fixed into position to prevent it from being tipped over
The following fixing options are available:
!
Screw Fixing.
!
Wire Fixing.
!
Spacer Frame*.
* An optional spacer frame kit is obtainable either from the your heater supplier or
direct from Baxi Fires Division Sales. The kit is a 75mm (3 inch) spacer kit (Kit number
0582631).
Page 7
INSTALLER AND OWNER GUIDE
©
Baxi Heating U.K. Limited 2006.
Figure 2. Loose parts identification (Items are not to scale)
