FUEL BED REFITTING - CERAMIC PEBBLES
1.
Place the rear base pebble in the firebox. It should rest on the ledges at the rear sides
of the burner unit. When located gently move the rear base pebble so that it is as far
forward as possible. The amount of movement will
be negligible (See figure 4).
2.
Place the front base pebble in the firebox with its
bottom front locating over the front rim of the
firebox. Pull the pebble forward so that it locates
immediately behind the front rim of the firebox.
(See figure 5).The front base coal will touch the
rear base coal as it is located.
Page 10
OWNER GUIDE
Figure 5 Front Base Pebble
Position
Figure 4 Rear Base Pebble
Position
