8
8.
Install the CC liner back over the old liner.
9.
Install the CC liner side over the old liner. Mark and punch out the hole for the CC hold
down spring bolt.
10.
Reinstall the bail the same way as you removed it in steps 5 and 6.
11.
Reinstall the door close spring to the bail.
12.
Reinstall the hold down spring the same way as you removed it in step 3.
13.
Mount the Carrier Cover the same way as you removed them in step 2. Use the screws
provided if needed.
14.
Reattach the CC Carrier (please see the drive tape removal and install instructions on
page 11).
15.
Run the unit to check for proper operation.