Bavaria Cruiser 33, Руководство пользователя

Страница: 28 / 49

Sailing yacht “Bavaria Cruiser 33”
Bavaria Yachtbau GmbH
28 of 49
2.5.4 Important warnings on the DC-installation
(12 Volt)
2.5.5 Important warnings on the AC-installation
(230 Volt / 115 Volt) (option)
Never
a) work on electric installation while the system is energized
b)
modify the craft’s electrical system or relevant drawings:
installation, alterations and maintenance should be
performed by a competent marine electrical technician.
c) alter or modify the rated current amperage of overcurrent
protective devices;
d) install or replace electrical appliances or devices with
components exceeding the rated current amperage of the
circuit;
e) leave the craft unattended with the electrical system
energized, except automatic bilge-pump, fire protection and
alarm circuits.
a) Never work on electric installation while the system is
energized
b) Do not modify the craft's electrical systems or relevant
drawings. Installation, alterations and maintenance should
be performed by a competent marine electrical technician.
Inspect the system at least biennially.
c) Disconnect shore-power connections when the system is not
in use and while working at the electrical system.
d) Connect metallic housings or enclosures of installed
electrical appliances to the protective conductor system in
the craft (green or green with a yellow stripe conductor).
e) Use double insulated or grounded (earthed) electrical
appliances.
f) WARNING: Do not allow the shore-power cable end to
hang in the water. An electrical field can be caused which
can cause injury or death to nearby swimmers.
g) WARNING: To minimize shock and fire hazards:
-
Turn off craft's shore-power connection switch before
connecting or disconnecting shore-power cable.
-
Connect shore-power cable to craft’s inlet before
connecting to shore-power source.
-
Close shore-power inlet cover tightly.
-
Do not alter shore-power cable connectors, use only
compatible connectors.