Baur SSG 1100, Руководство пользователя

Страница: 19 / 26

19
4 Servicing / Maintenance
4.1 Safety precautions
The Surge Voltage Generators SSG 1100, SSG 1500, SSG 2100 and SSG 3000 have a surge
capacitor available which consists of four isolated partial capacitors. Even in the turned off
condition these partial capacitors can show substantial residual charges. For safety reasons,
actions which involve opening the instrument may therefore be only carried out by instructed and
authorized service personnel, except the exchange of the high voltage connecting lead which may
be carried out by qualified, authorized persons considering the danger sign on the safety cover
(28), (read also "Replacing high voltage connecting lead" on side 25)
Service Personnel
- has appropriate training and experience,
- has knowledge about relevant standards, regulations, accident prevention rules and operating
conditions,
- is in a position to perform the required activities and recognize and prevent possible danger,
- is responsible to immediately report occurring changes in the instrument which could impair its
safe operation,
- is familiar with the instrument, its function and possible sources of danger,
- has adequate knowledge for maintaining and servicing the instrument
- has been authorized explicitly by BAUR to open the instrument and perform changes on the
instrument.
4.2 Fuses
External fuses
The two fuses F3 and F4 on the front panel of the surge voltage generator protect the control of
the lifting magnets and the control of the optionally connected Intercom SA 32 (option).
Internal fuses
The internal fuses F1, F2, F3 and F4 may be replaced by instructed personnel only.