manualshive.com logo in svg

Baumuller BM4-O-CAN-06, Руководство по эксплуатации

Поделиться
Скачать
Baumuller BM4-O-CAN-06 Скачать руководство пользователя страница 46

Requirements of the personnel carrying out work

Operating Instructions CANsync-Master Option Module for BM4-O-PLC  BM4-O-CAN-06
Document No.: 5.02056.01A

Baumüller Nürnberg Electronic GmbH & Co. KG

44

von 56

12.2

12.2 Requirements of the personnel carrying out work

The personnel that carries out disposal/dismantling must have the necessary knowledge 
and have been trained appropriately to carry out this work. Choose these persons such 
that they understand and can apply the safety instructions printed on the b maXX 4400 
basic unit and parts of it.

12.3 Disposal guide

Conditions

m

The CANsync-Master option module has already been correctly dismantled.

m

All the necessary technical aids for dismantling are ready for use and are in perfect 
technical condition.

Sheet steel

The front panel is made of galvanized sheet steel. Dispose of the sheet steel in your local 
reusable ferrous metal system.

Electronic scrap

You must dispose of the electronic scrap (PCB) that cannot be further dismantled as spe-
cial waste. When doing this, observe the applicable regulations.

12.4 Disposal locations/official bodies

Ensure that you carry out disposal in accordance with your company's guidelines and with 
the regulations of the responsible disposal locations and official bodies. If in doubt, con-
tact the Trade Supervisory Authority that is responsible for your company or the Environ-
mental Protection Authorities.

Содержание BM4-O-CAN-06





























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды