Baumuller b maXX BMC-M-SAF-02, Руководство по эксплуатации

Страница: 47 / 120

Assembly and installation
Operation Manual b maXX safe PLC BMC-M-SAF-02
Document no.: 5.07020.04
47
of 118
9
9.3 Preparation for assembly
You can prepare for the assembly by using the project planning documents for your plant.
You can determine the installation location and the dimensions for the mounting holes for
the 35mm C-rails based on the installation space needed (see
Z
Installation space
–
from
page 47 onward).
h
Drill the holes and fasten the 35 mm C-rails as needed.
9.4 Installation space
The following diagrams show you the height and depth dimensions of the modules of the
b maXX system. Use these diagrams to determine the amount of space you will need in
the electrical cabinet.
The width of the modules used varies. In order to establish the weight of your b maXX
system, add the width of the individual modules (which you want to use). Take note of
potential limitations to the number of the modules which can be used on one power sup-
ply.
CAUTION!
Danger of eye injury due to flying particles!
Metal particles will be propelled into the air when drilling the holes and making the
cutout.
Therefore:
Safety glasses
for protection the eyes from flying parts and spraying liquids