Baumuller b maXX BMC-M-SAF-02, Руководство по эксплуатации

Страница: 13 / 120

Preface
Operation Manual b maXX safe PLC BMC-M-SAF-02
Document no.: 5.07020.04
13
of 118
2
clarified with the factor on a case-by-case basis. The warranty will be rendered null and
void if the devices are operated differently than described here.
2.10 Customer service
Our customer service is available for technical support.
Information on the contact person responsible can be found at any time via telephone,
fax, E-mail or over the internet.
2.11 Terms used
The terms “PLC” or “safety control” or “BMC-M-SAF-02” are also used for the product
“
b maXX safe PLC .”
The terms “module” or “power supply” are also used in this documentation for the
Baumüller product “power supply for b maXX controller/safe PLC.”
The term “b maXX System” is also used for the product consisting of “power supply for
b maXX controller/safe PLC,” “b maXX safe PLC” and further system components.
A list of the abbreviations used can be found in
Z
Appendix A - Abbreviations
–
from page
99 onward.
2.12 Certification
The programmable safety controller b maXX safe PLC from Baumüller Nürnberg GmbH
has been developed in accordance with the standards specified in
Z
Chapter 2.12.1
–
and
certified by TÜV Rheinland.
Approval no. 968/EZ 358.00/09
Test report: 968/EZ 358.00/09
2.12.1 Approvals, directives and standards
Safety engineering stan-
dards and directives Area of application Approvals
IEC 61508, Parts 1-7 Functional safety of security-
related electric, electronic and
programmable electronic sys-
tems up to SIL 3
DIN EN ISO 13849-1 Safety-related components of
control units up to performance
level E
EN 954-1 Safety-related components of
control units up to category 4