Baumuller b maxx BM4400, Инструкция по эксплуатации

Страница: 264 / 360

Inspection intervals - maintenance notes
Instruction handbook b maXX BM4400, BM4600, BM4700
Document No.: 5.12008.07 Baumüller Nürnberg GmbH
264
of 358
10.3
10.3.1 Periodic maintenance
m Environmental condition
Check points Methods and criteria Inspection intervals
Daily Semi-
annu-
ally
Annu-
ally
Check environmental temperature, humidity and
vibrations.
Check whether dust, oil or drops of water appear. Visual inspection and measurement of the environmen-
tal conditions, comparison with standard values. O
Check whether there are hazardous objects in the
vicinity. Visual inspection O
m Voltage
Check points Methods and criteria Inspection intervals
Daily Semi-
annu-
ally
Annu-
ally
Check the voltage of the power supply system and
the control circuits Measurement and comparison with standard values. O
m Mechanical parts
Check points Methods and criteria Inspection intervals
Daily Semi-
annu-
ally
Annu-
ally
Are there any abnormal noises or vibrations? Visual and audio check O
Are there any loose screws? Tighten the screws. O
Are there any bent or damaged parts? Visual inspection O
Have there been any color changes due to over-
heating? Visual inspection O
Are there any dust or dirt deposits? Visual inspection O
m Power supply
Check points Methods and criteria Inspection intervals
Daily Semi-
annu-
ally
Annu-
ally
Are there any missing or loose screws? Replace the screws or, respectively, tighten them. O
Is there any deformation, cracking, damage or
color change on the device as a result of overheat-
ing or aging? Visual inspection O
Are there any dust or dirt deposits? Visual inspection O