Petrol-Powered Chainsaw – SX62
3
Symbols on the Chainsaw
For safe operation and maintenance, symbols are carved in relief on the chainsaw.
The port lo refuel “MIX GASOLINE”
Position
: Fuel tank cap
The port to refuel the “CHAIN OIL”
Position
: Oil cap
The indication regarding the switch. Flipping the engine switch to the “O” (STOP) direction
stops the engine.
Position
: Rear-left of the unit
The indication regarding the choke. Pulling out the choke knob closes the choke.
Position
: Rear-right of the unit
The indication regarding the chain oil adjuster nut.
“MIN” direction – the oil flow decreases
“MAX direction – the oil flow increases
Position
: Bottom of the clutch side
The position of the H-needle
The position of the L-needle
The position of the idle adjusting screw
Position
: Rear-left of the unit
