Baumr-AG RC-16 Скачать руководство пользователя страница 3

Страница: 3 / 7

Hydraulic Rebar Cutter

Safety Instructions



Use RC-16 cutters on concrete re-forcing bars only.



There is always a chance that the cut end may shoot out, especially if less than 30cm in length. Exceeding
designated material specifications greatly increases this risk and will also damage the tool. Do not attempt to
cut rebars. Harder, thicker or thinner than those specified.



Wear safety goggles, safety glassed with side shields or a face shield when using cutter.



Build safety screens to protect co-workers from possible flying ends. Place safety screen under the rebar
when working in high places.



Hold cutter firmly and maintain proper footing and balance. Do not over-reach when working in high place,
secure cutter to scaffolding with a safety rope. Check that power cord is not fouled and keep cord away from
sharp edges and heat. Check that all adjusting wrenches have been removed before using cutter.



To avoid possible electric shock, do not handle cutter with wet hands or use cutter in the rain or damp
places. Be aware of all power lines, electric circuits and other hazards that may be contacted, especially
those that are below the surface or otherwise hidden from view.



Disconnect cutter from outlet when not in use and before cleaning, adjusting or servicing. Do not disconnect
plug from outlet by pulling the cord. Always check that the switch lock if OFF before plugging in.



Do not use cutter in the presence of flammable materials (e.g. Paint, thinner, petroleum products,
adhesives).



Do not use cutter in a possibly lighted and clear of obstructions. Operator should at all times have an
unobstructed view of the cutter, rebar and surrounding area.



Do not wear loose clothes, dangling objects or jewellery. Restrain long hair. The use of a safety-helmet and
rubber soled boots is recommended. If safety gloves are worn, be especially careful that gloves does not get
caught in moving parts.



Keep all visitors at a safe distance from the work area for their own protection and to prevent distraction of
the operator.



Inspect cutter before each application. Faulty or loose cutter blocks could result in personal injury. Keep
handle dry, clean and free from oil and/or grease. Keep housing and piston free of dirt and iron filings. Check
that no screws or bolts are loose or missing. Following instruction for maintenance. Inspect switch, cord, plug
and any extension cable at regular intervals.



When not in use, store cutter and accessories in dry place where they can't be accessed by unauthorized
person.

Operation



Caution:

Indicates hazard that could result in minor personal injury and/or product damage.



Care:

Indicates hazard that will result in product damage.

Pre-use checks

1. Check oil level.
2. Check condition of cutter blocks and tightness of cutter block bolts.

Caution:

Using loose or cracked cutter blocks may result in injury to operators as well as damage to unit.

3. Check that the power source is appropriate for the cutter.

BAUMR-AG BAUMR-AG BAUMR-AG BAU