background image

20 Ton Electric Log Splitter 

E&OE 

©2018 Bäumr-AG 

10 

Before Use Checklist 

Ensure that you carry out all procedures below before operating the equipment. All procedures 

described are generic in nature and slight variations between different models may exist. 

Failure to 

follow the checklist and carry out the procedures correctly may result in making the product 

warranty void

Assembly 

2 or more persons are required for assembly. • Suitable tools (not supplied) are required for 

correct assembly. • Check all parts have been supplied and are in good condition before 

commencing assembly. • Fasteners are pre-assembled to applicable parts. • Washers are to be placed 

under nuts unless otherwise stated. • Firmly secure all fasteners.   

1.  Remove the 6 M8x20 bolts (

18

), spring washers (

22

) and washers (

23

) securing the ram guard (

21

) to 

the main machine frame (

1

) in the packing position (

A

). 

2.  Carefully pull the hydraulic ram assembly (

37

) backward so that the stops (

B

) on each side of it are fully 

in the slots in the bracket (

C

) at the rear of the main machine frame. 

3.  Place the ram guard (

21

) into position at the front of the hydraulic ram assembly (

37

), then attach it to 

bracket (

C

) using the previously removed fasteners. The machine is now in the operating position (

D

). 

 

4.  Place the control lever (

E

) in the operating position by attaching it to the 

control valve (

F

) and securing it in position using the pin (

G

) and clip (

H

).   

 
 
 
 
 
 
 

BAUMR-AG   BAUMR-AG   BAUMR-AG   BAU

MR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG  

BAUMR-AG   BAUMR-AG   BAUMR-AG   BAU

MR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG  

BAUMR-AG   BAUMR-AG   BAUMR-AG   BAU

MR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG  

BAUMR-AG   BAUMR-AG   BAUMR-AG   BAU

MR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG  

BAUMR-AG   BAUMR-AG   BAUMR-AG   BAU

MR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG  

BAUMR-AG   BAUMR-AG   BAUMR-AG   BAU

MR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG  

BAUMR-AG   BAUMR-AG   BAUMR-AG   BAU

MR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG  

BAUMR-AG   BAUMR-AG   BAUMR-AG   BAU

MR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG  

BAUMR-AG   BAUMR-AG   BAUMR-AG   BAU

MR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG  

BAUMR-AG   BAUMR-AG   BAUMR-AG   BAU

MR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG  

BAUMR-AG   BAUMR-AG   BAUMR-AG   BAU

MR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG  

BAUMR-AG   BAUMR-AG   BAUMR-AG   BAU

MR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG  

BAUMR-AG   BAUMR-AG   BAUMR-AG   BAU

MR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG  

BAUMR-AG   BAUMR-AG   BAUMR-AG   BAU

MR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG  

BAUMR-AG   BAUMR-AG   BAUMR-AG   BAU

MR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG  

BAUMR-AG   BAUMR-AG   BAUMR-AG   BAU

MR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG  

BAUMR-AG   BAUMR-AG   BAUMR-AG   BAU

MR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG  

BAUMR-AG   BAUMR-AG   BAUMR-AG   BAU

MR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG  

BAUMR-AG   BAUMR-AG   BAUMR-AG   BAU

MR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG  

BAUMR-AG   BAUMR-AG   BAUMR-AG   BAU

MR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG  

BAUMR-AG   BAUMR-AG   BAUMR-AG   BAU

MR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG  

BAUMR-AG   BAUMR-AG   BAUMR-AG   BAU

MR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG  

BAUMR-AG   BAUMR-AG   BAUMR-AG   BAU

MR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG  

BAUMR-AG   BAUMR-AG   BAUMR-AG   BAU

MR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG  

BAUMR-AG   BAUMR-AG   BAUMR-AG   BAU

MR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG  

BAUMR-AG   BAUMR-AG   BAUMR-AG   BAU

MR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG  

BAUMR-AG   BAUMR-AG   BAUMR-AG   BAU

MR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG  

BAUMR-AG   BAUMR-AG   BAUMR-AG   BAU

MR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG  

BAUMR-AG   BAUMR-AG   BAUMR-AG   BAU

MR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG  

BAUMR-AG   BAUMR-AG   BAUMR-AG   BAU

MR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG  

BAUMR-AG   BAUMR-AG   BAUMR-AG   BAU

MR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG  

BAUMR-AG   BAUMR-AG   BAUMR-AG   BAU

MR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG  

BAUMR-AG   BAUMR-AG   BAUMR-AG   BAU

MR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG  

BAUMR-AG   BAUMR-AG   BAUMR-AG   BAU

MR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG   BAUMR-AG  

Содержание HPS4500E























Отзывы:

Похожие инструкции для HPS4500E