Baumr-AG E-FORCE 400 II Скачать руководство пользователя

Страница: 6 / 19

Cordless Pole Chainsaw - E-FORCE 400 II

E&OE

Batteries and Battery Charging

Batteries may come supplied in a low-charge condition for shipping reasons – charge before

use. • A battery that is new or has not been used for a long period does not charge to full

capacity until after approximately 5 charge/discharge cycles. • Do not recharge batteries after using them if

they are not to be used for an extended period. • Recharge batteries only as and when required. • If the

battery is warm after use, allow it to cool before charging, otherwise it may not fully charge. • Use only with

the batteries and battery charger specified by the manufacturer. • Batteries can explode in the presence of

an ignition sour

ce, such as a pilot light. Never use any cordless product in the presence of open ﬂame.

Exploding batteries can propel debris and chemicals. • Do not use the charger in wet areas or expose it to

rain or water. • Ensure that the battery charger electrical cord is not subjected to damage or stress. Do not

operate the battery charger if it has a damaged electrical cord or plug. • Do not open the battery – danger of

short-circuiting and/or explosion. • Do not touch the battery terminals with metal objects and/or body parts as

short-circuit and/or personal injury may result. • For best results, charge batteries in temperatures between

7°C (45°F) and 40°C (104°F). • Dispose of non-serviceable batteries in an environmentally responsible

manner and according to local regulations. Charging time varies for different battery types depending on

battery capacity and charger output etc. • To prolong battery life, avoid leaving the battery pack on charge for

extended periods (over 30 days without use). • During charging, the battery may become warm and some

noise may be emitted – this is normal.

Charging

Generally, if the equipment stops during use, the cutting power reduces, or the motor slows considerably, it

indicates that the battery needs charging.
The battery pack has indicators that shows current charge status. To use the

function, press the button (

) on the battery – indicators for 25/50/75/100% charge

illuminate as applicable for a brief period
The battery charger has charge status LED indicators that illuminate and flash in

various combinations:

•

Red

– Charger ready.

•

Red Flash

- Battery is currently too hot and cannot be charged. The battery pack should be allowed to

cool.

•

Green Flash

– Charging.

•

Green

– Battery charged.

•

Red Flash

Green Flash

- Battery

fault detected.

1. Plug the charger (

) into an electrical

outlet and switch on.

2. Slide the charging dock (

) fully into

the battery (

). The battery charger

indicator LEDs will indicate battery

charge status. Charging takes

approximately 4 hours from fully

discharged.

3. When the battery is fully charged,

unplug the charger from power supply and remove the battery pack.

BAUMR-AG BAUMR-AG BAUMR-AG BAU