Baumer USB3 Vision Скачать руководство пользователя страница 55

Страница: 55 / 60

11. Start-Stop Behaviour

Start / Stop / Abort

11.1

Acquisition (Camera)

Once image acquisition is started, three steps are processed within the camera:

Determination of the current set of image parameters

▪

Exposure of the sensor

Readout of the sensor.

▪

Afterwards, this process is repeated until the camera is stopped.

Stopping the acquisition means that the process mentioned above is aborted. If the stop

signal occurs within a readout, the current readout will be completed before the camera is

stopped. If the stop signal occurs during an exposure, this will be aborted.

Abort Acquisition

The acquisition abort process is a special case where the current acquisition is stopped.

When an exposure is running, the exposure is aborted immediately and the image is not

read out.

Start / Stop

11.2

Interface

Transmission of image data from the camera to the PC will not proceed until the interface

is started. If image acquisition is started before the interface is activated, the recorded

images are lost.

If the interface is stopped during a transmission, this is aborted immediately.

11.3 Acquisition Modes

In general, three acquisition modes are available for the cameras in the Baumer VLU

series.

Free Running

11.3.1

Free running means the camera records images continuously without external events.

11.3.2 Trigger

The basic idea behind the trigger mode is the synchronization of cameras with machine

cycles. Trigger mode means that image recording is not continuous, but rather triggered

by external events.

11.3.3 Sequencer

A sequencer is used for the automated control of series of images, using different settings

for exposure time and gain.

Содержание USB3 Vision





























































Результаты поиска

Содержание USB3 Vision

Отзывы:

Похожие инструкции для USB3 Vision

Бренды по названию

Популярные бренды

Baumer USB3 Vision, Руководство пользователя

Результаты поиска

Содержание USB3 Vision

Отзывы:

Похожие инструкции для USB3 Vision

Бренды по названию

Популярные бренды