PCD41
32
www.baumer.com
Read
Modify
Example
bFuP - Display adjustment final value
➜
Press
key.
bFuP appears for 1 s on the display, afterwards the inal value.
➜
Enter inal value via keys
and
,
Press
key for conirmation.
When measuring rotational speed, 0...10 V correspond to a speed
of 0...1000 rpm. The inal value is set from 4095 to 1000.
Read
Modify
Limit value P1
➜
Press
key.
P1 appears for 1 s on the display, afterwards the limit P1.
➜
Enter limit P1 via keys
and
.
The minus sign to indicate negative values is enabled in program-
ming line 41 (two-point alignment). Press
to select minus sign
(-) and enter using key
.
➜
Press
key for conirmation.
Read
Modify
Limit value P2
➜
Press
key.
P2 appears for 1 s on the display, afterwards the limit P2.
➜
Enter limit P2 via keys
and
.
The minus sign to indicate negative values is enabled in program-
ming line 41 (two-point alignment). Press
to select minus sign
(-) and enter using key
.
➜
Press
key for conirmation.
If you Press the
once more, the current measurement will again
be displayed.
4.1 Tare function
Using the tare function the measured value F is gauged in relation to
„0“, similar to a scale balanced at 0 for inding out the net weight.
Operate the tare function utilizing key
.
Enter parameter 1 in programming line 46 to enable the tare function.
➜
Select measured value F
➜
Operate key
Display indicates „0“ (the previously indicated
measured value is internally saved as offset).
Enter parameter 1 (display only) in programming line 11 as function
lock in order to prevent unauthorised access.
Reread absolute measured value
Enter parameter 0 ( tare function disabled) in programming line
46. The internal offset is deleted. The display rereads the absolute
measured value again.
Tare operation utilizing the control inputs
Assign the desired function to control input 1 or 2 by entering para-
meter 5 (tare function enabled) in programming lines 31 or 32.
