PA203
14
www.baumer.com
2 Description
2.1 System description
Intended use of the process display is to visualize current and vol-
tage in industrial applications.
-Voltage input AC/DC up to 600 V
-Current input AC/DC up to 5 A
-Display range can be linearised
-LED display, 4 digits and programmable
-DIN housing 48 x 24 mm
2.2 Display range
Linear increase:
Display scaling defines interaction of input signal and displayed
value. Linear behavior requires defining two measured values - (inP)
respectively displayed values (dSP). Both limits should be at the
end of the display area to ensure maximum precision.
Displayed
value 2
Displayed
value 1
Measured
value 1
Measured
value 2
Linear decrease:
There are two options to enter the value coordinates: Either by
keypad (in SCAL mode) or using the teach-in feature (teach mode).
Assigning the displayed values requires manual entry (with device
still in teach mode).
Displayed
value 1
Displayed
value 2
Measured
value 1
Measured
value 2
Display
4 digits
Sticker to indicate measuring unit
