background image

Seite  1 

Design und Spezifikationen können ohne Ankündigung geändert werden

Installationsanleitung 5850-020

www.baumer.com/process

R

74 - 03

Level Switch LFFS 

WARNING

This product contains no replaceable parts.
In case of malfunction the product must be shipped to Baumer for repair

Description

The Level Switch LFFS designed to detect levels in tanks, media 
separation and provide empty-pipe detection or dry-run protection for 
pumps.

A high frequency sweep signal is radiated from the sensor tip into the 
tank. The media will act as a virtual capacitor, which together with a 
coil in the sensor head, will form a circuit creating the switch point 
signal. This virtual capacity will depend of the di-electric value of the 
media.  
 
By means of the FlexProgrammer 9701 the output can be configured 
to either NPN, PNP or digital output signal. A damping of the output 
signal can be activated in case of a fluctuating media level, e.g. during 
tank filling.

The measurement is precise and unaffected by the mounting position 
in the tank.  In the Flex-software a compensation for foam, bubbles and 
condensate as well as viscous media can be set.

The Flex-software also features an adjustment facility making the user 
able to adjust the sensor to a specific media. 

The Level Switch LFFS measures liquids such as water and beer as 
well as viscous, sticky fluids, such as honey, youghurt, toothpaste and 
ketchup. Even dry medias can be measured, eg. sugar or flour. 

The Level Switch LFFS is resistent against CIP and SIP agents.

Hygienic installation is also possible with the comprehensive range of 
accessories, see the overview at page 6.

When the top cover is removed  

do not look directly at LED 

with unshielded eyes or  

damage to retina may occur !!

Safety instructions

This instrument is constructed and tested according to the current EU-
directives and packed in technically safe condition. In order to maintain 
this condition and to ensure safe operation, the user must follow the 
instructions and warnings given in this instruction.

During the installation local standards have to be observed. Ignoring 
the warnings may lead to severe personal injury or substantial damage 
to property.

The product must be operated by trained staff. Correct and safe 
operation of this equipment is dependent on proper transport, storage, 
installation and operation.

All electrical wiring must conform to local standards and the connec-
tion must be made according to the connecting diagrams.

Before switching on the power supply take care that other equipment 
is not affected. Ensure that the supply voltage and the conditions in the 
environment comply with the specification of the device. 

Before switching off the supply voltage check the possible effects on 
other equipment and the processing system.

Содержание LFFS













Отзывы: