MB051a - 11102670
Baumer_EEXOG9S_II_DE-EN (19A2)
2
General notes
1
1
General notes
1.1
Symbol guide:
Danger
Warnings of possible danger
General information for attention
Informations to ensure correct device operation
i
Information
Recommendation for device handling
1.2
The
sine encoder with EX approval EExOG 9 S
is an
opto electro nic precision measure-
ment device
which must be handled with care by skilled personnel only.
1.3
The expected
service life
of the device depends on the
ball bearings
, which are equipped with
a permanent lubrication.
1.4
The
storage temperature range
of the device is between -15 °C and +70 °C.
1.5
In Ex areas the device must only be used within the
ambient temperature range
from -20 °C and +55 °C.
1.6
EU Declaration of Conformity
meeting to the European Directives.
1.7
We grant a
2-year warranty
in accordance with the regulations of the ZVEI (Central Association
of the German Electrical Industry).
1.8
Maintenance work
is not necessary.
Repair work
must be carried out by the
manufacturer
.
Alterations of the device are not permitted.
Contravention invalidates the EX approval.
1.9
In the event of
queries
or
subsequent deliveries
, the data on the device type label must be
quoted, especially the type designation and the serial number.
1.10
Disposal (environmental protection):
Do not dispose of electrical and electronic equipment in household waste. The product
contains valuable raw materials for recycling. Whenever possible, waste electrical and
electronic equipment should be disposed locally at the authorized collection point. If
necessary, Baumer gives customers the opportunity to dispose of Baumer products profession-
ally. For further information see www.baumer.com.
i
Warning!
Damaging the seal
on the device invalidates warranty.
