Baumer Hubner HMC16 Series, Монтаж и эксплуатация

Страница: 32 / 44

SETTINGS HMCP16 / ADjUSTMENT OF THE ENVELOPE DELAy TIME OF THE FILTER
28/40 MB168T1EN - 11184527, 19A2, Baumer_HMC16-T1_II_EN
y
0 1 2 3
176 304 560 1072
0
x
704 1216 2240 4288
1
Both inputs will be evaluated
(factory setting)
Only input 1 will be evaluated
= Factory setting
7.5 Adjustment of the envelope delay time of the filter
Adjustment of the envelope delay time of the filter (pin header 1)
The factory setting and ordered value for the envelope delay time of the filter can be set
in 3 different values via jumper positions on the pin header on the electronic board, see
section 7.2.1 or section 7.2.2 �
Jumper position envelope delay time of the filter in µs
, marked shows example of
section 6.2.6 �
7.6 Adjustment to skeleton operation
Only input 1 will be evaluated (pin header 2)�
At systems with multiple sensing (two inputs) you can switch off the second input�