SAFETy AND ATTENTION INSTRUCTIONS
MB247EN - 11171697, 16A2, Baumer_PMG10-ProibusDP_II_EN
4/25
2.2
Attention instructions for mounting and operation
)
Risk of destruction due to electrostatic charge
Electronic parts contained in the encoder are sensitive to high voltages.
»
Do not touch plug contacts or electronic components.
»
Protect output terminals against external voltages.
»
Do not exceed max. operating voltage.
)
Risk of destruction due to mechanical overload
Rigid mounting may give rise to constraining forces.
»
Never restrict the freedom of movement of the encoder. The installation instruc
-
tions must be followed.
»
It is essential that the speciied clearances and/or angles are observed.
)
Risk of destruction due to mechanical shock
Violent shocks, e. g. due to hammer impacts, can lead to the destruction of the
sensing system.
»
Never use force. Assembly is simple when correct procedure is followed.
»
Use suitable puller for disassembly.
)
Risk of destruction due to contamination
Dirt penetrating inside the encoder can cause short circuits and damage the optical
sensing system.
»
Absolute cleanliness must be maintained when carrying out any work on the open
terminal box.
»
When dismantling, never allow lubricants to penetrate the encoder.
)
Risk of destruction due to adhesive luids
Adhesive luids can damage the optical sensing system and the bearings. Dismoun
-
ting an encoder, secured to a shaft by adhesive may lead to the destruction of the
unit.
»
Do not use adhesive luids for ixing.
