Baumer HMG 10 PROFINET, Инструкция по установке и эксплуатации

Страница: 12 / 32

10c 10b 10a 5
10e
10d
10c 10b 10b
10c 9
11b 11a
7a 3 2
Mt = 3-4 Nm
TX 20 17 mm
5 mm
10 mm 1�6x8 mm
MOUNTING / MOUNTING TO DRIVE SHAFT
9/29
MB248EN - 11171699, 17A2, Baumer_HMG10-PROFINET_II_EN
4.3.2 Version with cone shaft
)
Lifetime restrictions and angle error by radial deviations
High runout of the drive shaft can cause encoder angle error, see section 4.5,
page 12 �
High runout of the drive shaft can cause vibrations, which can shorten the lifeti-
me of the encoder�
» Lubricate drive shaft!
)
Minimize drive shaft runout (≤0.2 mm; ≤0.03 mm recommended).
i
The encoder must be mounted with cable connection facing downward and not
exposed to water�