Operating Instructions
Conductivity measurement
CombiLyz AFI4/AFI5
Inductive conductivity transmitter
15.2 DFON menu structure
Identification
Type, S/N, Prod. date, FW
Product data
Product
identification
Tag, User date
Communication data
Poll addr., Desc., Message
Poll address
Loop current mode
Enable / Disable
Display menu
AFIx menu
Menu
Input config.
Output config.
Conductivity ranges
Temp. compensation
Conductivity range 1
Conductivity range 2
Conductivity range 3
Conductivity range 4
Range 1 (%/K)
Range 2 (%/K)
Range 3 (%/K)
Range 4 (%/K)
Advanced compensation
Output mode
Conductivity mode
Concentration mode
Temperature output
Output current limits
Error output
Output damping
Cond. mode / Conc. mode
Use a PC
Temp. at 4 mA
Temp. at 20 mA
Output temp. unit
Lower current limit
Upper current limit
Lower temp. curr. limit
Upper temp. curr. limit
Error output current
Error output channel
Damping value
Data display mode
Diagnosis
Factory reset
Calibrate conductivity
Calibrate temperature
Reset user calibration
Yes / No
Yes / No
Calibration value
Calibration value
Write address number
Select range
Select range
Select range
Select range
Compensation value
Compensation value
Compensation value
Compensation value
Define advanced comp.
Range 1
Range 2
Range 3
Range 4
Cond. at 4 mA
See Range 1
See Range 1
See Range 1
Cond. at 20 mA
Temperature value
Temperature value
Celsius / Fahrenheit
Current value
Current value
Current value
Current value
Current value
Select channel
www.baumer.com
17 / 52
