Baumatic STD6.2SS-W, Инструкция по эксплуатации, Страница: 18 / 28

2) Drill these holes into the wall using a 6 mm diameter drill bit. If
you intend to use your cooker hood as an extraction fan, you will
need to fit a ducting kit through this that will connect to your
appliance.
3) Insert the rawlplugs into the holes and then insert the top
screws part way, so that the screws stick out by 10 mm.
4) Hang the hood up on the screws. Insert the bottom screws.
5) Tighten the screws the rest of the way in.
6) For the extraction function , connect the exhaust outlet pipe to
the collar strip. Find the screw holes on the top of the cooker
hood. Tighten the bolts from inside the hood.
Installation into the underside of a kitchen cabinet
1) Extraction function only : Cut a hole measuring 130 mm in
diameter in the external wall behind the cupboard into which the
hood will be set and then attach one end of the ducting hose to
it. The other end should be connected to the top of the cooker
hood.
2) If necessary, make a hole for the power cable to feed through.
3) Hold the hood against the underside of the hood and mark the
points for the supporting and fastening holes.
4) Screw in the four screws supplied with the installation accessory
kit.
5) Hook the hood onto the supporting screws and tighten them
completely.
18