Baumatic Royal Chiantishire BRC3BDY, Руководство пользователя

Страница: 30 / 40

30
inimum flow adjustment for hob gas taps.
All work must be carried out by a CORGI registered
engineer.
o
Switch the burner on and
o
Remove the knob from
the tap and place a small
ed screwdriver to
the outside the tap.
o
Unscrew the adjusting screw, in order to increase the gas flow
to decrease the gas flow.
tained when the flame has a
e adju
screwed in.
o
Refit the control knob.
o
Make sure that the flame does not go out by quickly turning
from maximum flow to mini
. If it does then remove
.
M
set the knob at the
minimum position.
blad
or tighten the adjusting screw
o
The correct adjustment is ob
length of about 3 – 4 mm.
o
For butane/propane gas, th sting screw must be tightly
mum flow
the control knob and make further adjustments to the gas
flow, testing it again once the adjustment has been made