Baumatic PG2SS, Инструкция по эксплуатации

Страница: 11 / 20

INSTALLATION INSTRUCTIONS
INSTALLATION NOTES
1. Cut the aperture to the dimensions shown below or use the template if printed on the
packaging.
2. Invert the Hob and apply the sealing agent provided to match the outer perimeter edge.
3. If the sealing agent is a strip type, the protective covering must be removed from both
sides.
Do not leave a gap in the sealing agent or overlap the thickness.
NOTE: do not use any Silicone based sealant, as this can damage the worktop surface
if repairs are required.
4. Insert the appliance into the aperture and fix in position via the clamps & screws,
tightening the screws evenly (see Fig. 1 below).
5. If the appliance is to be installed in a Leisure Accommodation Vehicle, the
requirements of N 721 must be applied.
HOB APERTURE DIMENSIONS
Fig.1
Model
A B C D E
B60 595 500 560 480 30
B61 595 500 560 480 30
B62 595 510 560 480 30
BT62 595 510 560 480 30
B67 685 510 560 480 30
B68 685 510 560 480 30
B69 685 510 560 480 30
B16.5 860 510 830 480 30
B16.6 860 510 830 480 30
BG2 288 510
490 268
30
BWK1 288 510
490 268
30
B17.5 860 510 830 480 30
B17.6 860 510 830 480 30
B17.7 860 510 830 480 30
PG2 288 510 285 480 30
PWK1 288 510
490 268
30
P62 585 500 560 480 30
P68 685 500 560 480 30
P75 740 500 560 480 30
P90 860 510 830 480 30
PF75 740 500 700 480 30
B44 600 510 560 480 30
B46 600 510 560 480 30
BC45 600 510 560 480 30
BF45 600 510 560 480 30
AS24 595 510 560 480 30
AS25 740 510 560 480 30
9