Baumatic PCE9220SS, Инструкция по эксплуатации, Страница: 36 / 40

o
The cable can be looped if necessary, but make sure that is not
kinked or trapped when the cooker is in position.
Replacing the mains supply cable
If the mains supply cable is damaged, then it must be replaced by an
appropriate replacement.
The mains supply cable should be replaced in accordance with the
following instructions:
o
Switch the appliance off at the control switch.
o
Open the box of the supply board.
o
Unscrew the clamp (A) fixing the cable.
o
Replace the cable with one of the same length and in accordance
with the specification given above.
o
The “green-yellow” earth wire must be connected to the terminal
marked
. It must be about 10 mm longer than the live and
neutral wires.
o
The “blue” neutral wire must be connected to the terminal
marked with letter (N) - the live wire must be connected to the
terminal marked with letter (L).
My appliance isn’t working correctly
o
The oven isn’t coming on.
*
Check that the oven is in manual operation mode.
*
Check that you have selected a cooking function and a cooking
temperature.
o
There appears to be no power to the oven and grill.
*
Check that the appliance has been connected to the electrical
mains supply correctly.
*
Check that the mains fuses are in working order.
*
Check that the operating instructions for setting the time of day
and putting the appliance into manual operation mode have been
followed.
36