Baumatic MEGAWDSS, Инструкция по эксплуатации

Страница: 33 / 40

32
INSTALLATION INSTRUCTIONS
REMOVING THE TRANSPORTATION SCREWS:
* PLEASE NOTE THAT FAILURE TO REMOVE THE TRANSPORTATION
SCREWS WILL RESULT IN YOUR GUARANTEE BECOMING VOID! *
o
THE TRANSPORTATION SCREWS, WHICH CAN BE FOUND AT THE REAR OF YOUR
WASHER-DRYER, MUST BE TAKEN OFF BEFORE YOU CAN USE YOUR MACHINE. THEY ARE
THERE ONLY TO STABILISE YOUR APPLIANCE DURING TRANSIT.
o
HOW TO REMOVE THESE SPACERS AND SCREWS
:
1) LOOSEN THE SCREWS WITH A SUITABLE SCREWDRIVER.
2) REMOVE THE SCREWS BY PULLING THEM OUT WHEN UNDONE (TOP LEFT
DIAGRAM, BELOW).
3) THE PLASTIC PARTS FOUND IN THE INTERIOR OF YOUR WASHING MACHINE
WILL FALL DOWN INSIDE OR UNDER THE APPLIANCE.
4) PICK UP THE PLASTIC PARTS. IF THERE ARE STILL SOME THAT HAVE NOT
FALLEN DOWN, OPEN YOUR MACHINE’S REAR PANEL TO RECOVER THEM BEFORE
REPLACING THE PANEL (BOTTOM LEFT DIAGRAM, BELOW).
5) INSERT THE PLASTIC TRANSPORTATION SCREW CAPS (THESE CAN BE
FOUND INSIDE THE ACCESSORIES BAG) IN THE HOLES WHERE THE TRANSPORTATION
SCREWS HAD BEEN (TOP RIGHT DIAGRAM, BELOW).
6) KEEP THE TRANSPORTATION SCEWS AFTER YOU HAVE REMOVED THEM
FROM THE MACHINE – YOU MAY NEED THEM SHOULD YOU MOVE HOME IN THE
FUTURE.