Baumatic MEGA10WD Скачать руководство пользователя страница 25

Страница: 25 / 36

GUIDE FOR OTHER USEFUL PROGRAMMES

* DELAY START (RESERVED WASHING)

Note

• If you want to check the selected programme, press the 'Start/Pause' button again.
• Before starting 'Time Delay':

- Load laundry and close Door.
- Put the detergent and fabric softener into the detergent compartment..

• The finishing time may vary from your selected time as it may be dependent upon your water supply

and/or selected water temperature.

• 'WOOL' and, 'DELICATE' and 'DRUM CLEANING' programmes cannot be selected with select 'Time

Delay'.

• Adding clothes during 'Time Delay' operation is not allowed.

Put the laundry into the drum.

Then close the Door.
• In the detergent compartment, put the powder into the main wash and prewash

sections (See Diagram - Page

• Softener should be poured into the middle section of the compartment and be below

'MAX' level.

• Put the detergent into the pre wash section only if you want to add prewash.
• When you want to use bleach, put it into the main wash section with detergent.

Press the Power button.
• The LED shows

this signal:

'- --'

Select the programme using the programme selection dial.
• If you press 'Start/Pause' button after pressing

the

Power button without selecting

programme, the 'NORMAL' programme is selected as default programme.

• Select the 'Washing cycle'

'Rinse time(s)'

'Spin speed' and 'water

temperature' by pressing by pressing the relevant buttons.

Press the 'DELAY START' button.
• The 'Time Delay' LED will light up.
• Select the time you wish to delay your programme from one to twelve hours by

pressing the appropriate button.

• The time displayed shows the time the selected programme will finish.

Press the 'Start/Pause' button.
• If you carry out the above instructions correctly, only

the

'Time Delay' and 'Lock' LED

will be displayed.

Step

Содержание MEGA10WD





































Результаты поиска

Содержание MEGA10WD

Отзывы:

Бренды по названию

Популярные бренды

Baumatic MEGA10WD, Инструкция по эксплуатации

Результаты поиска

Содержание MEGA10WD

Отзывы:

Бренды по названию

Популярные бренды