Baumatic ISL95SS, Руководство пользователя, Страница: 15 / 24

14
5)
Attach exit connector ‘D’ to the hood using the 2 provided
screws.
6) Connect to the room exhaust vent (Fig. 2).
7) Attach 2 of the 4
supporting angles ‘E’ to
the motor housing ‘S’ with
2 screws each; make sure
that the folds (E1) are
facing forwards (Fig. 3.1).
8) Attach the other 2
supporting angles (‘E’) to
the rear part of the motor
housing but this time the
folds (E2) must be facing
outwards (Fig. 3.2).
9) While you’re doing this, bear in
mind that you can alter the height
of the hood according to the
height of the angles’ support
holes. Just make sure that
whichever level of support hole
you choose to connect through
must be the same for all four
angles.
10) Install the motor frame
joining the 4 supporting angles
using the stiffener ‘F’ (positioned
as seen in Fig. 3) using 4 screws.
11) Insert the casing ‘H’ on the motor frame, keeping the vents
for the filtering operation towards the top and laterally.
INSTALLATION INSTRUCTIONS
– Installing your Cooker Hood