Baumatic ISL4SS, Руководство пользователя

Страница: 24 / 32

o
IMPORTANT: Make sure that you screw through the same hole
on each frame section; otherwise the bracket will not be level.
o
IMPORTANT: Please take care to make sure that the clip on
each frame section faces the direction shown in the diagram
below. They must face outwards to be able to locate over the cut
outs in the securing plate, later in the installation.
7)
Place the framework inside of the cooker hood, making sure that it
is located inside of the corner pieces that you connected to the cooker
hood motor in step 5.
IMPORTANT: Make sure that the clips on the
framework are pointing upwards.
o
Using a screwdriver, fully tighten screws through the corner
pieces into the framework.
IMPORTANT:
If you are going to connect your cooker hood to
external ducting, then you must complete the steps listed in the
“Connecting to external ducting” section before carrying on with the
rest of the installation (this information can be found on page 27).
24