Baumatic ELECTRIC SINGLE OVENS, Инструкция по эксплуатации, Страница: 11 / 28

BURNER TECHNICAL SPECIFICATIONS TABLE
Liquid gas Natural gas Mains gas Burner Power
Kw
By-pass
mm
Nozzle
1/100
Consumption
g/h
Nozzle
1/100
Consumption
m
3
/h
Nozzle
1/100
Consumption
m
3
/h
Oven
4 0.52 95 290 1.45 0.36 3 0.80
25 25
30 37
Supply
pressures
mbar
minimum
rated
maximum
35 45
17
20
25 6
8
15
Air
regulation mm open 2 2
Power supply voltage
~V 220-240 50/60 Hz
Electric grill power
W 2500
ADAPTING TO OTHER TYPES OF GAS:
if the gas delivered is different from the appliance
gas setting, the following adaptation operations
must be performed:
Ensure that the oven is electrically disconnected;
fully open the oven door; take the bedplate out, then
slide the burner out as follows:
1. take the diffuser element C out, removing
the nuts D;
2. move the plug holder bracket E plus thermocouple;
3. remove the screw B and slide out the burner tube;
4. remove the injector F with a 7 mm spanner and
replace it following the instructions in the previous
table (the injector must be locked to prevent it
sliding out).
Refit the oven burner performing the above operations
in reverse order; replace the bedplate.
Pay particular attention to the plug wires and
thermocouple tubes.
7